Use Volupt Shampoo and Volupt Conditioner, then spray generously with Volupt Spray.

Blow-dry whilst brushing, then roll your hair in large barrel rollers until completely cooled.

Release the curls, brush out lightly, back comb at the root for support and spray with Volupt Spray.

Use Volupt Shampoo and Volupt Conditioner, then spray evenly with Volupt Spray.
Blow-dry your hair while brushing, steering your hair in all directions to create lift.

Backcomb the roots.

Use a straightening iron over the surface, finishing with Volupt Spray.

Use Volupt Shampoo and Volupt Conditioner, then spray the roots with Volupt Spray.

Blow-dry your hair while brushing, pulling hair up at the roots, moving hair up and off the face.

Backcomb at the roots and on top of your head. Spray with Shaper Zero Gravity.

Use Volupt Shampoo and Volupt Conditioner, to create a basic lift.

Rub a lemon-sized quantity of Mousse Forte into towel-dried hair and brush-blow-dry.

Barrel iron and barrel curl the entire head, coating each strand with Mousse Forte.

Once your hair is cool, backcomb at the roots.

Use Volupt Shampoo and Volupt Conditioner, to create a basic lift.

Apply Mousse Forte into towel-dried hair and brush-blow-dry.

Use different sizes of curling irons and spiral curl the entire head, rubbing the curls out with your fingers once they’re cool.

Use Volupt Shampoo and Volupt Conditioner, to create a basic lift.

Rub in a generous quantity of Mousse Forte and brush-blow-dry, then set in large barrel rollers.

Once cool, brush your hair out then back comb at the root and finish with Shaper Zero Gravity.

Use Volupt Shampoo and Volupt Conditioner, then spray generously with Volupt Spray.

Blow-dry your hair while brushing, spraying with Shaper Zero Gravity as you go.

Fix each section with a pin until cool, then brush out and spray with Shaper Zero Gravity.

Use Volupt Shampoo and Volupt Conditioner, then spray evenly with Volupt Spray.

Blow-dry your hair while brushing, steering your hair in all directions to create lift.

Finally, use a straightening iron over the surface of your fringe, finishing with Volupt Spray.

Blow-dry straight hair upside down. For curly-unruly hair, blow-dry with a paddle brush.

Once dry, work a small amount of Microweb Fiber into hair with your palms.

Use a flat iron to smooth and define. Add another layer of Microweb Fiber if desired.

To flatten fringe, blow-dry with a comb. Use a paddle brush elsewhere to create movement.

When nearly dry, apply Microweb Fiber starting at the tip, moving towards the roots. Shape and mold allowing texture to develop.

For a more thread-like texture and additional hold, add another layer of Microweb Fiber to dry hair.

Use flat iron for added definition.

Section dry hair by starting at the temple and curving around the ear to the nape.

Apply a thin layer of Microweb Fiber to the top. Create curls with a big barrel iron. Clip up and let cool.

Subdivide sides horizontally in 2 parallel sections. Weave 2 plats, starting at the front hairline following the section-line.

Shape top curls with Microweb Fiber. Push fringe to the side and connect it with the top section.

Lift hair at roots while blow-drying. Use a comb to slightly bevel fringe.

Once dry, apply Matte Putty from roots to end. Randomly crimp thin sections with a micro iron.

Fluff with fingers. For a matted moisturized effect, apply an extra layer of Matte Putty.

Bend some large pieces with a big barrel iron. Twist and pin, leaving ends out.

Blow-dry hair with a diffuser or let air-dry.

When it’s about 70% dry, scrunch Craft Clay into hair to enhance, define and control curly texture.

Add more to dry hair until satisfied with look.

Apply Potion 9 generously through damp, naturally curly hair. Dry using a diffuser.

Re-apply Potion 9 to dry hair to define and smooth curls as needed.

Start with damp hair and apply Thickefy Foam throughout, especially at the roots.

Blow dry with a round brush for touchable volume and thickness. Back comb lightly to increase height at the front, top and sides if needed.

Hold and detail the style by using more Thickefy Foam on dry hair.

Begin by blow drying hair.

Apply a liberal amount of Craft Clay to dry hair to hold and reveal texture with a matte finish.

Apply Gel Forte on damp hair. Blow dry for body.

Take a section from crown to behind the ear to the nape. Using Re-Shaper, set sections with hot rollers. Leave the rest of the hair straight.

Release set. Tease hair to create a cushion and pin into shape. Use straight hair at the front to "cover" and blend the two textures.

Place and hold using Re-Shaper.

Apply a few drops of Liquid Gloss to damp hair. Blow dry with a paddle brush for smooth texture and ultimate shine.

Rub a few more drops in your palms and touch the mid shaft and ends for soft separation.

For this glam-polished look, spray Halo Mist on damp hair.

Blow dry with a styling brush for a smooth result.

Lightly reapply Halo Mist to dry hair for a diamond-shine surface.

Glide Stylixir through wet hair evenly. Pin-curl hair starting at the neck. Loosely finger wave fringe, over directing hair toward the nape.

Dry hair completely. Release set, place hair keeping the front smooth and work with texture on mid length and ends.

Smooth strands with extra Stylixir and use to control and define.

Spray Potion 9 Lite on damp hair to increase body while taming and conditioning hair's texture.

Blow or air dry.

Once dry, touch the ends with Taming Elixir for separation and movement.

Apply Mousse Forte on damp hair. Blow dry for height and movement.

Set hair in hot rollers of various sizes. Release the rollers and back comb the hair liberally to accentuate movement.

Part hair down the middle. Part off a triangular section for the fringe. Form two high pony tails on each side of the part.

Set the two pony tails with curling irons, using various barrel sizes and random sections.

Release hair by combing fingers through and shape the silhouette, holding in place with Shaper Fierce.

Apply Liquid Steel to the bangs on dry hair to hold.

Spray Shine Define on the roots of clean, wet hair. Blow dry giving height at the crown and stay form fitting around the perimeter.

Once dry, tease the crown area, using a teasing brush for frothy texture.

Spray Shine Define as a finishing spray to hold and define the style.

Spray Shine Define section by section on dry hair. Use a flat iron at a 45-degree angle to create straight outward panels.

Shake hair with hands to release while keeping some definition.

Spray Shine Define on dry hair to hold in place.

Apply Thickefy Foam on dry hair section by section.

Use a small barrel curling iron to spiral set the whole head.

Lightly brush through each section to reveal a light ethereal texture.

Apply Whipped Crème through dry hair. Start curling the hair with a curling iron leaving the root straight.

Work each curl with your finger tips to release the set and create touchable movement.

Re-apply Whipped Crème on dry hair to define and separate ends.

Start with dry hair. Spray Shaper Zero Gravity on each small section and use a crimping iron for a radical texture change.

Use Molding Mud on the undercut and ends for separation and texture.

Apply Gel Forte on slightly damp hair. Use perm rods to "spiral set."

Start mid shaft to the ends on the "smooth side," moving closer to the roots toward the "curly side."
Dry and release each curl and use fingers to separate each strand. Pin hair into asymmetrical shape.
Spray Re-Shaper to hold.

Spray Trilliant on damp hair. Place in desired style, then air or blow dry.

Finish with a flat iron where needed.

Spray another layer of Trilliant on dry hair for control, separation and shimmer.

Start by misting Trilliant on a small section of dry hair and curl with a curling iron.

Continue misting Trilliant over each section and curl the hair in different directions with various size barrels to create a polished texture.

Re-apply Trilliant on the finished look for an extra boost of shine.